EMC Brass Cable Gland - D Series Metric Thread

EMC Brass Cable Gland - D Series Metric Thread

Material: The joint body parts are made of nickel plated brass, the clamping parts are made of plastic (PA) , and the seals and O-ring are
  • EMC Brass Cable Gland - D Series Metric Thread
Inquiry
Product Description

Material: The joint body parts are made of nickel plated brass, the clamping parts are made of plastic (PA) , and the seals and  O-ring are made of nitrile rubber (NBR) .

Product Certification: CE, ROHS ,IP68 and ISO9001.

Protection Degree: in the specific cable range, the using of the O-ring helps tighten head, so that to reach IP68-10 bar pressure.

Working temperature: 

Static: -40℃to 100℃, short time up to 120℃. 

Dynamic: -20℃to 80℃, short time up to 100℃

Thread length: The short  thread is suitable for holes in the  board or equipment with inner thread, while the long thread ia available for thick planted. Threads extension can be customized.

Features: This product is a kind of specially designed metal cable gland which is used as an end.When shielded cable entries through this cable gland, the brass material contact chips attached in the cable gland will contact with the metal isolated network in the cable, Then the interfering electromagnetic wave will be leaded to the grounding wire, thus the interference source of electromagnetic wave will be evacuated. The brass materials cable glands with different sizes are widely applicable for outlet areas when anti-electromagnetic is needed. It is also waterproof with IP68 protection degree.

More options: Customization is acceptable. Welcome to inquire.

EMC Cable Gland ---D series, Metric thread
Product Code Thread  AG Cable range(mm) Thread diameter(mm) Board caliber(mm) Thread length GL(mm) Joint length(mm) Wrench diameter (mm)
JX-D.M12-EMC M12*1.5 6.5-3 12 12-12.2 7 19 14
JX-D.M14-EMC M14*1.5 8-4 14 14-14.2 7 19 17
JX-D.M16-EMC M16*1.5 8-4 16 16-16.2 8 20 18
JX-D.M18-EMC M18*1.5 10-5 18 18-18.2 8 21 20
JX-D.M20-EMC M20*1.5 12-6 20 20-20.2 8 22 22
JX-D.M22-EMC M22*1.5 14-10 22 22-22.2 8 23 24
JX-D.M24-EMC M24*1.5 14-10 24 24-24.2 9 25 24/27
JX-D.M25A-EMC M25*1.5 14-10 25 25-25.2 9 25 24/27
JX-D.M25B-EMC M25*1.5 18-13 25 25-25.2 9 27 30/27
JX-D.M27A-EMC M27*1.5 18-13 27 27-27.2 9 27 30
JX-D.M27B-EMC M27*2 18-13 27 27-27.2 9 27 30
JX-D.M28A-EMC M28*1.5 18-13 28 28-28.2 9 27 30
JX-D.M28B-EMC M28*2 18-13 28 28-28.2 9 27 30
JX-D.M30A-EMC M30*1.5 18-13 30 30-30.2 9 29 30/32
JX-D.M30B-EMC M30*2 18-13 30 30-30.2 9 29 30/32
JX-D.M32A-EMC M32*1.5 22-15 32 32-32.2 10 29 35
JX-D.M32B-EMC M32*2 22-15 32 32-32.2 10 29 35
JX-D.M33A-EMC M33*1.5 22-15 33 33-33.2 10 29 35
JX-D.M33B-EMC M33*2 22-15 33 33-33.2 10 29 35
JX-D.M36A-EMC M36*1.5 25-18 36 36-36.2 10 31 40
JX-D.M36B-EMC M36*2 25-18 36 36-36.2 10 31 40
JX-D.M37A-EMC M37*1.5 25-18 37 37-37.2 10 31 40
JX-D.M37B-EMC M37*2 25-18 37 37-37.2 10 31 40
JX-D.M40A-EMC M40*1.5 25-18 40 40-40.2 11 31 40/45
JX-D.M40B-EMC M40*2 25-18 40 40-40.2 11 31 40/45
JX-D.M40C-EMC M40*1.5 30-22 40 40-40.2 11 35 45
JX-D.M40D-EMC M40*2 30-22 40 40-40.2 11 35 45
JX-D.M42A-EMC M42*1.5 30-22 42 42-42.2 11 35 45
JX-D.M42B-EMC M42*2 30-22 42 42-42.2 11 35 45
JX-D.M47A-EMC M47*1.5 33-25 47 47-47.2 11 37 50
JX-D.M47B-EMC M47*2 33-25 47 47-47.2 11 37 50
JX-D.M48A-EMC M48*1.5 33-25 48 48-48.2 11 37 50/52
JX-D.M48B-EMC M48*2 33-25 48 48-48.2 11 37 50/52
JX-D.M50A-EMC M50*1.5 38-32 50 50-50.2 12 37 50/55
JX-D.M50B-EMC M50*2 38-32 50 50-50.2 12 37 50/55
JX-D.M54A-EMC M54*1.5 38-32 54 54-54.2 12 38 57
JX-D.M54B-EMC M54*2 38-32 54 54-54.2 12 38 57
JX-D.M56A-EMC M56*1.5 38-32 56 56-56.2 12 38 57/59
JX-D.M56B-EMC M56*2 38-32 56 56-56.2 12 38 57/59
JX-D.M60A-EMC M60*1.5 44-37 60 60-60.2 13 38 64
JX-D.M60B-EMC M60*2 44-37 60 60-60.2 13 38 64
JX-D.M63A-EMC M63*1.5 44-37 63 63-63.2 13 38 64/68
JX-D.M63B-EMC M63*2 44-37 63 63-63.2 13 38 64/68
JX-D.M64A-EMC M64*1.5 44-37 64 64-64.2 13 38 64/68
JX-D.M64B-EMC M64*2 44-37 64 64-64.2 13 38 64/68
JX-D.M72-EMC M72*2 52-42 72 72-72.2 15 42 65/68
JX-D.M75-EMC M75*2 52-42 75 75-75.2 15 42 78
JX-D.M80-EMC M80*2 62-50 80 80-80.2 15 45 86/88
JX-D.M88-EMC M88*2 70-60 88 88-88.2 15 45 98
JX-D.M100-EMC M100*2 80-70 100 100-100.2 15 45 110

Draft Drawing of Gland:

Feedback

Related News